How hard is it to put a new floor in a regular bass boat? - putting floor boat
Plywood Glue ... ... ... Screw fiberglass mat and resin .. some tools .... should be easy to
Saturday, December 12, 2009
Putting Floor Boat How Hard Is It To Put A New Floor In A Regular Bass Boat?
Subscribe to:
Post Comments (Atom)
3 comments:
Nix first saw the opportunity to remove the interior and exterior mirrors, with one piece fiberglass skin on the floor on a 1 / 2 will be replaced on the side all the way around the word, not depth, the thickness of the glass (about 1 / 8 inch) SCREWDRIVER now with a sheet of fiberglass shell of the old wood, you remove (the old layers of the soil should be easy) if you are any holes or notches first to throw a cardboard template, nothing, until you are completed, the rest is just a bunch of measuring and cutting
Sounds easy on paper.
Good luck and have fun.
To move, unlike a boat "regular bass?
Some require some plywood fiberglassing use of carpeting. It's easy to glaze a bit more complicated, but still "no power".
Tool is not very difficult, but you do not need a job and simply good. I come to the floor 17 'Tri-Hull in a few days.
Go to Google and type this to get fiberglass boat floor replacement, good site to many.
See also these guys; http://www.fiberglasssite.com/servlet/St ...
Here I have all my supplies glass. With cheap polyester resin, and I, Chapter 2 ounces chopped mats. It was an interesting project and worth the effort.
Moreover, instead of marine plywood or external, pressure-treated layers used. In the old site, click on the thread covered Fiberglassing. Good information there.
This is no easy task. If you're a carpenter, well, complete with a workshop and what you do "Cost vs. thinking. Benefits. It is quite possible that you could buy a similar boat with his plate, much less than the place of their current boat.
Post a Comment